image

A perovskite for the efficient photocatalytic conversion of ethane into ethylene and hydrogen

Structural characterization of the catalyst. a, PXRD patterns of LMCO samples (θ is half of the diffraction angle). b, HRTEM image of LMCO-10. c, XPS spectra of Mn 2p for LMCO-0 and LMCO-10 samples. d, XPS spectra of O 1s for LMCO-0 and LMCO-10. e,f, SFLPs on LMCO-0 (e) and LMCO-10 (f). Red, white, purple, yellow and blue colours represent O, H, Mn, Cu and La atoms, respectively. Credit: Nature Energy (2024). DOI: 10.1038/s41560-024-01541-7

Ethylene (C2H4) is a highly flammable compound widely used in numerous settings, including the manufacturing of packaging and plastic-based items, the chemical industry, agriculture and health care. Developing effective and sustainable methods to produce ethylene on a large scale could help to meet the rising demand for this versatile hydrocarbon.

One possible way of producing ethylene entails converting the hydrocarbon ethane (C2H6), which is abundant in natural gas, into ethylene and hydrogen. Proposed methods to do this, however, require substantial electrical power and are thus associated with a significant carbon footprint.

Researchers at Soochow University, University of Toronto and other institutes recently introduced a new approach to produce ethylene via the solar-powered photocatalytic dehydrogenation of ethane using the perovskite oxide LaMn1−xCuxO3. This perovskite, outlined in a paper published in Nature Energy, possesses favorable properties that make it a promising selective photocatalyst for converting ethane to ethylene and hydrogen using solar or LED light.

“Industrial-scale ethylene production occurs primarily by fossil-powered steam cracking of ethane—a high-temperature, high-energy process,” Rui Song, Guanshu Zhao and their colleagues wrote in their paper. “An alternative, photochemical, pathway powered by sunlight and operating under ambient conditions could potentially mitigate some of the associated greenhouse gas emissions. We report the photocatalytic dehydrogenation of ethane to ethylene and hydrogen using LaMn1−xCuxO3.”

Song, Zhao and their colleagues showed that using the perovskite oxide LaMn1xCuxO3 as a photocatalyst, they could efficiently convert ethane into ethylene and hydrogen without the need for external heat sources. This conversion can be achieved using solar or LED lights, thus resulting in lower carbon emissions.

“This perovskite oxide possesses redox-active Lewis acid sites, comprising Mn(III) and Mn(IV), and Lewis base sites, comprising O(-II) and OH(-I), collectively dubbed surface-frustrated Lewis pairs,” the team wrote. “We find that tuning the relative proportions of these sites optimizes the activity, selectivity and yield for ethane dehydrogenation.”

The researchers evaluated their solar-powered ethylene production approach using a rooftop prototype device and attained remarkable ethylene production rates. In addition, they carried out comprehensive technical and economic analyses, which highlighted the sizable economic potential of their proposed solution.

“The highest ethylene production rate and ethane conversion achieved were around 1.1 mmol g−1 h−1 and 4.9%, respectively,” Song, Zhao and their colleagues wrote. “We show a simple outdoor prototype to demonstrate the viability of a solar ethylene process. In addition, techno-economic analysis revealed the economic potential of an industrial-scale solar ethylene production from ethane.”

More information:
Rui Song et al, Ethylene production via photocatalytic dehydrogenation of ethane using LaMn1−xCuxO3, Nature Energy (2024). DOI: 10.1038/s41560-024-01541-7

© 2024 Science X Network

Citation:
A perovskite for the efficient photocatalytic conversion of ethane into ethylene and hydrogen (2024, June 19)
retrieved 19 June 2024
from https://techxplore.com/news/2024-06-perovskite-efficient-photocatalytic-conversion-ethane.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

Comments are closed

Uploading